***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 9:37 am


Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
Michaeldc
PostPosted: Tue Jan 01, 2019 10:17 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1483
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Hi folks,

Does anyone make an adjustable octave mando bridge like one finds on a standard mandolin?

Thanks, Michael


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
J De Rocher
PostPosted: Tue Jan 01, 2019 8:52 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2522
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
I have an archtop octave mandolin and its bridge is a standard adjustable mandolin bridge just like the ones on mandolins I have.

EDIT: I just saw that Elderly has mandola-specific bridges that are compensated for mandola strings, so I guess the compensation is what you're looking for.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter
Top
 Profile  
 
Michaeldc
PostPosted: Tue Jan 01, 2019 11:05 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1483
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
J De Rocher wrote:
I have an archtop octave mandolin and its bridge is a standard adjustable mandolin bridge just like the ones on mandolins I have.

EDIT: I just saw that Elderly has mandola-specific bridges that are compensated for mandola strings, so I guess the compensation is what you're looking for.


Thanks, Jay

I'll take a look
Top
 Profile  
 
J De Rocher
PostPosted: Wed Jan 02, 2019 1:27 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2522
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
If you can't find a source for an adjustable octave mando bridge, maybe you could buy a standard bridge, use the base and adjusters, and then make a new saddle part from a piece of ebony. The figure below is from a thread on the mandolincafe forum in which the OP was asking for a picture showing the view of an octave mando bridge from above to see how it was compensated so he could make a saddle. The bottom two saddles are variants for octave mandolins.

Attachment:
Octave mandolin bridge compensation.jpg


Strangely, the bridge on my octave mando is a standard mandolin bridge that is compensated the same as the top bridge in the figure. I'm going to check the intonation on the A-string course tomorrow and see how good or bad it is. I haven't noticed a problem playing it in the first seven frets. Maybe it goes off at the higher frets.


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter
Top
 Profile  
 
Michaeldc
PostPosted: Wed Jan 02, 2019 10:58 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1483
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
J De Rocher wrote:
If you can't find a source for an adjustable octave mando bridge, maybe you could buy a standard bridge, use the base and adjusters, and then make a new saddle part from a piece of ebony. The figure below is from a thread on the mandolincafe forum in which the OP was asking for a picture showing the view of an octave mando bridge from above to see how it was compensated so he could make a saddle. The bottom two saddles are variants for octave mandolins.

Attachment:
Octave mandolin bridge compensation.jpg


Strangely, the bridge on my octave mando is a standard mandolin bridge that is compensated the same as the top bridge in the figure. I'm going to check the intonation on the A-string course tomorrow and see how good or bad it is. I haven't noticed a problem playing it in the first seven frets. Maybe it goes off at the higher frets.


Thanks, Jay

I found the same drawing and it looks like the octave bridge is pretty much straight across. The bridge I made above is straight across and it sounds right all the way up the neck.

I'm afraid you are gonna have to wait to hear and play it because it just SOLD this morning. I'll get another one going soon.

Thanks again, M
Top
 Profile  
 
J De Rocher
PostPosted: Wed Jan 02, 2019 1:05 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2522
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
Dang! Well it must have come out nice to have found a new home so fast. Congratulations!

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com